Parapets for building sites

GBM is a leading company in Europe in the production and distribution of temporary edge protection systems, paying particular attention to international technical standards and certifications, supplying prestigious leading companies in the construction industry all over the world.

The international technical standard EN 13374 : 2013 identifies three classes of protection, depending on the inclination of the working surface.

Class “A”: inclination up to 10° (≈17,63 %);

Class “B”: inclination up to 30° (≈57,73%) or up to 60° (≈ 173,2 %) if the falling height is less than 2 meters;

Class “C”: inclination up to 45° (=100%) or up to 60° (≈ 173,2% ) if the falling height is less than 5 meters.

All GBM’s parapets are produced and certified in compliance with international technical standards and even customized solutions can be designed, manufactured and certified.

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

This standard guardrail post with clamp, regulated by inner threaded rod, is suitable for securing flat or inclined surfaces (up to 10°).

Anti-fall support 100 cm high.

Distance between the railings of 160 cm.

Weight of the product 5 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

Guardrail post with clamp with tilting plate mounted in the lower part of the clamp to allow the use on concrete stairs. Suitable for securing flat or inclined surfaces (up to 10°)..

Anti-fall support 100 cm high or 120 cm.

Distance between the railings of 160 cm or 130 cm

Weight of the product 5,5 kg or 6 kg

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

Screw parapet available in versions with wedges (for the use of pipes Ø 33.7 mm) and with L (for the use of wooden boards). Suitable for securing flat or inclined surfaces (up to 10 °). The lower part of the upright is equipped with a closed support for wooden boards.

Anti-fall support 110 cm high.

Distance between the railings of 140 cm.

Weight of the product 6 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

Guard rail with threaded bar available for tubes Ø 33,7 mm and for wooden boards. Suitable for securing flat or inclined surfaces (up to 10°). The lower part of the post is equipped with a closed support for the wooden boards.

Anti-fall support 110 cm high.

Distance between the railings of 220 cm.

Weight of the product 6 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

Standard guardrail post with clamp, regulated by a dywidag rod. Thanks to its large tubular section and to its reinforced clamp, this item is the strongest of its class. The lower part of the post is equipped with a closed support for the wooden boards.

Anti-fall support 110 cm high.

Distance between the railings of 180 cm.

Weight of the product 9 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

This temporary edge protection can be used on horizontal surfaces (such as terraces and slabs) or vertical supports (like stringcourses and ribs). The upright is available with supports for boards or for tubes. The device is equipped with a mechanism for quickly moving the clamp into the locked position.

Anti-fall support 110 cm high.

Distance between the railings of 150 cm.

Weight of the product 7,5 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal planes.

This support, thanks to its characteristics of ductility and reversibility, is used on horizontal surfaces.

This edge protection for borders is installed using four plugs.

Anti-fall support 120 cm high.

Distance between the railings of 140 cm.

Weight of the product 3,5 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

Very useful and versatile universal guardrail thanks to the rotation of the plate around the axis of the upright. It can be installed on all types of surfaces, whether they are horizontal, inclined or vertical. The lower support is sliding in order to adapt to any size of installation.

Anti-fall support 120 cm high.

Distance between the railings of 160 cm.

Weight of the product 6,5 kg.

EN 13374 CLASS B

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

Guard-rail post to be inserted in the concrete, available in different versions: base Ø 25 mm, base Ø 40 mm, post for tubular railings of Ø 33,7 mm, for wooden boards and for angles.

Railings with a base diameter of 2,5 cm or 4,0 cm.

Anti-fall support 110 cm high.

Distance between the railings of 140 cm

Weight of the product 4 kg or 3,5 kg

EN 13374 CLASSE A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

Guard-rail post to be inserted in the concrete, available in different versions: base Ø 25 mm, base Ø 40 mm, post for tubular railings of Ø 33,7 mm, for wooden boards and for angles.

Railings with a base diameter of 2,5 cm or 4,0 cm.

Anti-fall support 110 cm high.

Distance between the railings of 220 cm

Weight of the product 5 kg or 4,5 kg

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

Guard-rail post to be inserted in the concrete, available in different versions: base Ø 25 mm, base Ø 40 mm, post for tubular railings of Ø 33,7 mm, for wooden boards and for angles.

Railings with a base diameter of 2,5 cm or 4,0 cm.

Anti-fall support 110 cm high.

Distance between the railings of 220 cm

Weight of the product 5,5 kg

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

Anti-fall support 120 cm high.

Distance between the railings of 220 cm.

Weight of the product 5 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

The edge protection is equipped with an adjustable post depending on the extension of the edge of the roof. The lower support is sliding in order to adapt to any size of installation. Particularly suitable for restorations and roof renovation. This system can replace the scaffolding in a more convinient way.

Anti-fall support 150 cm high.

Distance between the railings of 140 cm.

Weight of the product 12 kg.

EN 13374 CLASS B

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

This device is installed by fixing a special plate with bolts onto the roof, next to the gutter. The post is then hooked to this anchorage without piercing the facade. The lower part of the post rests against the exterior wall of the building. Particularly suitable for restorations and roof renovation. This system can replace the scaffolding in a more convinient way. The lower support is sliding in order to adapt to any size of installation.

Anti-fall support 110 cm high.

Distance between the railings of 160 cm.

Weight of the product 9 kg.

EN 13374 CLASS B

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

Edge protection that allows you to install a working platform. This safety system is fixed to the wall using an M24 threaded bar and a counter-flange. Proper telescopic or fixed scaffolding boards can be used on it.

Anti-fall support 110 cm high.

Distance between the railings of 160 cm.

Weight of the product 12 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

This support, thanks to its characteristics of ductility and reversibility, is used on surfaces with variable inclination.

Edge protection that allows you to install a working platform. This safety system is fixed to the wall using an M24 threaded bar and a counter-flange. Proper telescopic or fixed scaffolding boards can be used on it.

Anti-fall support 110 cm high.

Distance between the railings of 160 cm.

Weight of the product 11,5 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal and planes with variable inclination.

Edge protection designed to delimit the cast slab and to secure the work area. It is secured to the outside wall using the threaded bar and flanges. The lower support is sliding in order to adapt to any size of installation.

Anti-fall support 170 cm high.

Distance between the railings of 150 cm.

Weight of the product 13,0 kg.

EN 13374 CLASS B

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

Edge protection designed to delimit the cast slab and to secure the work area. It is secured to the outside wall using the threaded bar and flanges. The lower support is sliding in order to adapt to any size of installation.

Anti-fall support 110 cm high.

Distance between the railings of 130 cm.

Weight of the product 8 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

Edge protection designed to delimit the cast slab and to secure the work area. It is secured to the outside wall using the threaded bar and flanges. The lower support is sliding in order to adapt to any size of installation.

Anti-fall support 135 cm high.

Distance between the railings of 140 cm.

Weight of the product 12 kg.

EN 13374 CLASS A

Fall protection device suitable for horizontal, vertical and planes with variable inclination.

The device allows you to install the rail climbing edge protection system during the raising of the perimeter walls. This collective protection system is available for uprights with wedges (for the use of tubes Ø 33,7 mm) and L (for the use of wooden boards).

Anti-fall support 140 cm - 280 cm high.

Distance between the railings of 220 cm or 150 cm.

Weight of the product 18 kg / 25 kg or 17 kg / 23 kg.

EN 13374 CLASS A