Coating and galvanising: industrial ecological processes? In GBM: yes

Thanks to technological development, some metal processing associated to heavy industry are becoming more and more eco-friendly. Surprised? Here’s the reason why.

ZAMÓW WYCENĘ ONLINE

To be protected from corrosion caused by the flow of time and by atmospheric agents, metal and steel manufactures may undergo different treatments. The main and most used treatments, with decades of history, are the coating and galvanising. With the evolution of technologies that are at the basis of these processes, these activities, that in the past were less regulated, are increasingly converting into a sustainable impact on the environment.

In GBM, we have decided to follow this path to the bottom to guarantee that all our products are compliant with the ethical code we self-imposed.

Puntelli pre zincatura
Puntelli post zincatura

Zinc and environment

Not only is the zinc an element that occurs in nature, it is also essential to all living organisms, whether they are flora or fauna, that means human beings included. Every living being has an optimum range of concentration of zinc and some food contains a good quantity of it. Without going too deep into the biochemical field, we’ll make two distinctions:

  • • Human beings are not exposed risks because of excess of zinc; however, they can suffer from the shortage of it. The composition of dietary supplements is an example in which the zinc is often associated to magnesium and iron, since the human being has to get those substances from food for it cannot synthesize them autonomously.
  • • On the other hand, ecosystems work in the opposite way, that means that usually the shortage of zinc isn’t a problem, however, an excessive concentration can be.
  • From this premise we can understand that the main purpose of those who work with such metal in industrial processes is to facilitate its disposal and reversibility into the environment to avoid ecological imbalance.

    Puntelli pre zincatura
    Puntelli post zincatura

    The main advantages of modern galvanising

    We adopt the most modern metallurgical techniques to make sure that our products are eco-friendly. Here’s what are the main positive aspects of galvanising made by GBM.

    1. Galvanising is an extremely efficient way to protect the steel

    Since we do our best to protect our products, we can guarantee their lifetime of decades even under the most adverse weather conditions, so that regular maintenance won’t be needed and therefore the natural productive costs won’t rise.

    2. No loss of material

    Galvanising doesn’t imply loss of material, avoiding therefore the consumption of natural resources. Moreover, the steel will be recycled more efficiently, not being affected by erosion produced by natural causes. In our continent, steel is the most recycled material to this day, with peaks of 87% in some countries of the European Union, and to keep such high percentages we need to maintain its structural integrity.

  • 3. Galvanising allows a very high retrieval of residues of processing

    This is another key point of the sustainability of every industrial process, the less useless residues we produce, the less they are going to affect the environment.

  • 4. Reduction of water consumption and of greenhouse gas emission

    Unlike last century, when it was necessary to use great quantity of water for galvanising, the most modern techniques and the remodelling of establishments have revolutionised the consumption of that valuable resource. Now the different stages of processing are executed in a factory characterised by a continuous production which reduces waste and reuses the heat released, when possible. Therefore, from 2000 to today, we have obtained a reduction of the water consumption of 90% and of carbon dioxide emissions of 60%.

  • 5.Adherence to the European legislation 2011/65/UE

    The galvanisation of our products is compliant to this legislation and to its subsequent modifications and integrations about the restrictions on the use of certain dangerous substances in electric and electronical equipment.

    More specifically, the processes and materials we use during galvanising DO NOT CONTAIN:

  • a.Lead;

  • b.Mercury;

  • c.Cadmium;

  • d.Hexavalent chromium;

  • e.Polybrominated biphenyls (PBB);

  • f.Polybrominated diphenyl ethers (PBDE).

    Puntelli pre zincatura
    Puntelli post zincatura

    Coating: what has changed from the past

    The other most used process to protect the metal is the coating. Even in this case, the current techniques, both from their applicative and compositional points of view, have shown great improvements regarding the efficiency of consumption and the reuse of residues of processing. Due to the chemical nature of such residues, the waste deriving from those processes is often considered a special waste, with all that it implies in terms of time and disposal cost, as well as its environmental impact.

    There is another very important factor that entered the coating field some years ago and is spreading more and more: water-based paints. Water based paints, also called water soluble paints, allow to solve problems that were once considered insurmountable.

    What ecological advantages do our painted products have?

    Thanks to the use of water-based paints it has been possible to provide the following results:

    1. Reduction of traditional solvents and their substitution with water

    Comparing the formula of two comparable paints, water based and solvent-based paints, we may see that water base paints contain a considerably lower percentage of solvent chemical substances, with an average reduction of 40-50%. This obviously implies a lower spread and dispersion in the processing of chemical substances.

    2. Reduction of volatile and harmful substances in the drying process

    The idea behind the coating process is the application of a continuous and resistant film that protects the material beneath, in our case the steel. This layer is obtained at a stage after its application, the drying process. The use of water-based paints reduces remarkably, in some cases up to 95%, the emission of volatile organic compound (VOC), fine-grained powders that can cause several problems, into the environment.

  • 3.Complete lack of some solvent pollutants used in the past.

    Due to the composition itself of the water-based paints, many solvents massively used in the past cannot be used in such paints because of their high fat-solubility.

    Examples include:

  • a.Toluene;

  • b.Trichloroethylene;

  • c.Perchloroethylene;

  • d.Vinyl chloride and others pertaining to the group of chlorinated solvents;

  • e.N-hexane

  • Last update:

    News

    GBM's shipbuilding scaffoldings

    GBM's shipbuilding scaffoldings

    Shipyards are complex and demanding environments, requiring specialised solutions such as GBM's shipbuilding scaffolding.
    Props required to sustain a slab: guidelines on how to establish distances, classes and quantities.

    Props required to sustain a slab: guidelines on how to establish distances, classes and quantities.

    At what distance should the props for sustaining a slab be positioned? Which is the appropriate class? How many props do I need for an appropriate work? These are not trivia questions. Here is a guideline to help you get the right answers.
    Multidirectional scaffolding GBM certified EN 17067:2013

    Multidirectional scaffolding GBM certified EN 17067:2013

    The ideal solution for the design and construc- tion of complex scaffolding

    News

    More than 100 accessories for props, scaffoldings, couplings, formworks and stacking pallets

    GBM Kontakt: biura, ceny, wyceny.

    Potrzebujesz dokładniejszych informacji na temat produktów GBM? Zapytaj!