Подпори с натиск – издърпване

GBM push push-pull diagonal props consist of two telescopically slidable pipes.

The displacement thereof can be adjusted by means of a threaded ring nut and a pin inserted into the holes of the inner pipe.

This structure enables it to perform two actions, the classic pushing action (like normal props do) and the pulling action.

These elements are crucial for temporary and safe stabilisation of structures during the casting step, whether formworks, wooden panels, or prefabricated elements of various types.

GBM push-pull props come in three models.

Type L push-pull props: adjustment carried out using a double handle sleeve

Type N push-pull props: adjustment carried out using a single ring nut.

Type H push-pull props: adjustment carried out using two ring nuts.

Type L1 push-pull

Type L1 push-pull prop: lighter prop, usually comes in the coated version with the aim of optimising the costs-benefits ratio given that it is used for propping light objects.

Features of the Type L1 push-pull prop:

Pipe protection: RAL 3009 red hot-dip coating with minimum durability in compliance with the ASTM D 2247-87 standard tests in a humidostatic chamber;

Inner pipe diameter 48 x 1.80 mm;

Outer pipe diameter 56 x 1.65 mm;

Both versions are characterised by:

• Extension adjustable between 1.80 and 5.00 m depending on the prop model, at 10 cm intervals by means of a double handle sleeve adjustment;
• Pulling guaranteed at 22.00 kN regardless of the use extension;
• Anti-shearing system: the greater length of the inner pipe with respect to that of the outer pipe enables guaranteeing an at least 10 cm difference between the two during the closing stage so as to avoid injury;
• Plates that can be articulated mounted on the two ends, so as to ensure the greatest adherence possible when fixing and mounting at multiple angles.

The difference between the type N push-pull prop and the other classes lies in the type of verticality adjustment.

It is carried out by means of a single ring nut which increases or reduces the extension of the prop depending on the rotation direction.

The single ring nut can be slid in both directions by using two drilled details positioned in the cavities of the threaded pipes.

Below are the features of GBM’s “type N push-pull prop”:

• Extension adjustable between 1.80 and 5.00 m depending on the prop model, at 10 cm intervals by adjusting a spherical cast iron ring nut;
• Pulling guaranteed at 38.00 kN regardless of the use extension;
• Anti-shearing system: the greater length of the inner pipe with respect to that of the outer pipe enables guaranteeing an at least 10 cm difference between the two during the closing stage so as to avoid injury;
• Plates that can be articulated mounted on the two ends, so as to ensure the greatest adherence possible when fixing and mounting at multiple angles;
• Pipe protection: hot-dip galvanization in compliance with the UNI EN ISO 1461 standard, with a guaranteed minimum thickness of 55 microns;
• Inner pipe diameter 48 x 3.00 mm;
• Outer pipe diameter 60 x 2.50 mm;

Upon request:

• Sticker customised with the customer’s logo, bearing information on capacity and maximum extension;

Type H1 push-pull

GBM - Type H1 push-pull.

Its distinctive features:

• pulling guaranteed at 38.00 kN
• inner pipe diameter 48 x 3.00 mm;
• outer pipe diameter 60 x 2.50 mm;

The difference between the type H push-pull prop and the other classes lies in the type of plumbing. It is carried out by means of two ring nuts which increase or reduce the extension of the prop.

We - at GBM manufacture two type H props: H1 (with smaller diameter) and H2 (with larger diameter). Both versions are characterised by:

• Extension adjustable between 1.80 and 5.40 m depending on the prop model, at 10 cm intervals by adjusting two steel ring nuts;
• Pulling guaranteed at 38.00 kN regardless of the use extension;
• Anti-shearing system: the greater length of the inner pipe with respect to that of the outer pipe enables guaranteeing an at least 10 cm difference between the two during the closing stage so as to avoid injury;
• Plates that can be articulated mounted on the two ends, so as to ensure the greatest adherence possible when fixing and mounting at multiple angles;
• Pipe protection: hot-dip galvanization in compliance with the UNI EN ISO 1461 standard, with a guaranteed minimum thickness of 55 microns;
• Inner pipe diameter 63x 2.60 mm;
• Outer pipe diameter 76 x 2.60 mm;

Upon request:

• Sticker customised with the customer’s logo, bearing information on capacity and maximum extension;

Would you like to view the full GBM props catalogue?

Download the full catalogue in pdf format (5 MB)

Or go straight to the online version.

GBM shoring prop specifications, data sheet & capacity tables: maximum extension, minimum extension, inner tube, outer tube, weight, compression... If you want to know it all, just...

Download the datasheet of our shoring props (PDF / 0.1 MB)